Menu
Your Cart

CelFi GO G41 3G 4G 5G Telstra Optus Vodafone Switchable Stationary Kit suit homes

CelFi GO G41 3G 4G 5G Telstra Optus Vodafone Switchable Stationary Kit suit homes
Hot
CelFi GO G41 3G 4G 5G Telstra Optus Vodafone Switchable Stationary Kit suit homes
  • Brand: CelFi
  • Product Code: Celfi Go4 G41 SK
  • Shipping Cost: $18.00
  • SKU: CELFI GO4 G41 SK
$2,358.00

Cel-Fi GO4 (G41) represents the latest in 4G cellular repeater technology. Building on the success of the GO2 model, GO4 has a higher output power (+20 dBm), providing the largest coverage area of all GO models.

GO4 operates on more frequency bands, now supporting Optus 700 MHz and 2300 MHz 4G networks, and can be easily switched between Optus and Vodafone-TPG should you change service provider.

Cel-Fi GO4 is ideal for large inbuilding cellular coverage applications for Optus and Vodafone. The higher output power means more service antennas can be run from the one repeater, and by popular request, the unit now has an RJ45 Ethernet network interface for remote management.

Expanding on GO2’s dual-band functionality, GO4 supports carrier aggregation with 40 MHz of relay bandwidth.

Designed for boosting cellular coverage in buildings, this repeater operates on more frequency bands & can be easily switched between Telstra, Optus & Vodafone (one carrier at a time)
* Requires an internal & external antenna

 

FEATURES

  • 700L/850/900/1800/2100/2300/2600 MHz (700 band not supported on Vodafone)
  • 3G, 4G, VoLTE, NB-IoT (GO4 has 5G capabilities, but currently not enabled or approved)
  • Carrier Switching using WAVE App between Optus or Vodafone – Telstra approval pending
  • Up to 3000 m2 coverage area
  • Two band simultaneous relay
  • Total System Relay Bandwidth – Up to 40 MHz
  • Remote Monitoring, Control and Alert Capabilities via WAVE Portal
  • Ethernet Port for connection to internet source for live monitoring
  • Cel-Fi GO4 represents the latest in 4G cellular repeater technology. Building on the success of the previous model, GO4 has a higher output power (+20 dBm), providing the largest coverage area of all GO models; up to 3000 square meters
  • The higher output power means more service antennas can be run from the one repeater, and by popular request, the unit now has an RJ45 Ethernet network interface for remote management. 
  • GO4 operates on more frequency bands and can be easily switched between Telstra, Optus and Vodafone-TPG (one carrier at a time) should you change service provider. 
  • Up to 3000m indoor coverage area
  • Bluetooth wave app for iPhone, Android and computers and for switching between Telstra, Optus or Vodafone – one carrier at a time
  • Supports: 700L / 850 / 900 / 1800 / 2100 / 2600 MHz (Note:700 band is not supported on Vodafone)
  • Cellular bands: 3G, 4G, VoLTE, NB-IoT, (5G Ready*)
  • Rigid diecast Aluminium casing with IP54 rating, suitable for adverse environments 
  • Ideal product to boost and distribute a 3G/4G mobile signal within a building
  • Supporting voice and mobile internet for multiple mobile devices, boosting your indoor mobile coverage has never been easier.
  • 100dB of system gain
  • Total System Relay Bandwidth – Up to 40 MHz
  • Band Selection Button

**Note: Cel-Fi GO will boost a single band at a time: 3G(850) or 4G(700 or 1800). It is highly recommended to leave the GO in 3G mode to ensure voice calls are received. Voice on 4G (VoLTE) will only work in selected areas and with later model phones

**Note: GO4 has the future capability to boost 5G as the feature is there but not enabled as it has not been approved by the carriers. When it does become approved, users will be able to run an update through the app which will enable the 5G functionality on the GO4 device.


Includes

1 x Cel-Fi GO G41

1 x AC PSU

1 x LPDA Antenna

2 x 10M SMA-M to N-Male lead

1 x DAS Omni Antenna

 


SPECIFICATION

CaseOne piece extruded Aluminium
Current Consumption40W Max
Operational Temperature Range0° to 40°C
Weight Inc Frame2Kg
RF Gain100dB
RF ConnectorsSMA (female) on all ports
Dimensions260mm(W) x 107mm(D) x 63mm(H)
IP Rating20
BrandCel-Fi

 

Write a review

Please login or register to review