Icom IC-M323G VHF Marine Transceiver with GPS Receiver

Brand: Icom Australia
Product Code: Icom IC-M323G
Price:
$418.00 $359.70

Features

  • Built-in GPS Receiver Simplifies Installation
  • Icom Marine Family User Interface
  • High-Definition Dot-Matrix Display
  • Meets Latest Class D DSC Specifications
  • IPX7 Waterproof 1m Depth of Water for 30 Minutes
  • Common NMEA Interface For External GPS/NAV Connection
  • AquaQuake™ Draining Function
  • MA-500TR AIS Transponder Compatible
  • MarineCommander™ Compatible

Built-in GPS Receiver (IC-M323G only) The built-in GPS receiver shows your current position and time and can be used for DSC calls. GPS data source is selectable from internal and external GPS (and GPS-OFF setting).

Intuitive User Interface Icom’s common Marine Family User Interface provides simple operation for the boat owner. A rotary selector and directional keypad provide intuitive operation. The high-definition dot-matrix display allows all information to be clearly viewed. 

Built-in Class D DSC The built-in DSC watch function monitors Ch. 70 (DSC channel) activity, even while you are receiving another channel. DSC functions include: distress, individual, group, all ships, urgency, safety, position request/report, polling request and DSC test calls. 

IPX7 Waterproof Protection The IC-M323/G withstands submersion in up to 1.0m depth of water for 30 minutes. It is equivalent to the IPX7 standard. 

Common NMEA Interface When receiving DSC information from another vessel, the IC-M323/G can transfer it to a navigational device via NMEA 0183 connectivity.

Compatible with MA-500TR Class B AIS Transponder The IC-M323/G can be integrated with the MA-500TR Class B AIS Transponder, which allows you to transmit DSC individual calls to a selected vessel instantly without manual MMSI entry. It is very handy if you are waiting to contact vessels on the AIS screen - an essential safety feature in an emergency.

Favorite Channel Function  This function promotes quick channel selection. Set the “Tag” channel to the channels used most often. When pushing the up/down buttons on the hand microphone, only the tagged channels 
are selected, while untagged channels are skipped

Specifications

General

  • Frequency range:
    • Tx: 156.000–161.450MHz 
    • Rx: 156.000–163.425MHz
    • CH70: 156.525MHz
  • Usable channels:
    • INT, USA* channels
    • * Available depending on version
  • Type of emission: 16K0G3E (FM), 16K0G2B (DSC)
  • Power supply requirement: 13.8V DC nominal (10.8–15.6V DC)
  • Current drain:
    • Tx 25W output: 5.5A 
    • Rx Max. audio: 1.5A
  • Operating temperature range: –20°C to +60°C
  • Antenna impedance: 50Ω (SO-239)
  • Dimensions (W×H×D) (projections not included) 180×82×119.9mm
  • Weight (approx.) 1.2kg
  • NMEA in/out formats RMC, GGA, GNS, GLL, DSC, DSE

Transmitter

  • Output power: 25W, 1W
  • Max. frequency deviation: ±5.0kHz
  • Frequency stability: Less than ±1.5kHz
  • Spurious emissions: Less than 0.25μW

Receiver

  • SensitivityMain: –5dBμ emf typ. (20dB SINAD)
  • DSC: –4dBμ emf typ. (1% BER)
  • Squelch sensitivityMain: Less than –2dBμ emf
  • Adjacent channel Main selectivity: More than 70dB
  • DSC: More than 73dBμ emf (1% BER)
  • Spurious response Main: More than 70dB
  • DSC: More than 73dBμ emf (1% BER)
  • Intermodulation Main: More than 68dB
  • DSC: More than 68dBμ emf (1% BER)
  • Hum and noise: More than 40dB
  • Audio output power (at 10% distortion, 4Ω load) More than 2W

Ingress Protection Standard

  • Water IPX7 (Waterproof protection)

Supplied accessories:

  • Hand microphone, HM-200B/SW 
  • DC power cable
  • Mounting bracket kit

Submit a question about Icom IC-M323G VHF Marine Transceiver with GPS Receiver


Name:


Email:


Question:

Enter the code in the box below:



Write a review

Your Name:



Your Review:

Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:





#{message}
#{time_ago}