Menu
Your Cart

Oricom UHF400R Oricom Heavy Duty 5w UHF CB Radio

Oricom UHF400R Oricom Heavy Duty 5w UHF CB Radio
Click for more info-17 %
Oricom UHF400R Oricom Heavy Duty 5w UHF CB Radio
  • Brand: Oricom
  • Product Code: UHF400R
$299.00
$249.00

UHF400R Oricom Heavy Duty 5w UHF CB Radio

 

The UHF400R features a 12v/24v auto swithch, which makes it easy to install in any truck, regardless of the power supply. It is especially built for Australian Transport. Through the external heat sink, this unit will ensure you maintain a full 5 watt power output. The tuned sensitivity will also ensure optimal reception.

 

UHF400R Key Features

  • 80 CHANNELS* Allows you to choose from 80 transmission frequencies (75 voice) to transmit or receive messages
  • 12v/24v Auto Switching For easy installation into any vehicle regardless of power supply
  • Automatic Level Control (ALC) For consistent audio output levels
  • 5 Watt Maximum TX Output Power Maximum transmit power for best possible range
  • 200 Receive Only Channels Allows you to program in other channels in the UHF frequency between 400MHz to 512MHz and monitor transmissions
  • Duplex (Range Extender) Capability Local repeater stations area. This extends the effective range of the radio, giving you the greater reach
  • 38 interference eliminator codes (CTCSS)
  • Block out any unwanted conversations
  • Open/Group/Priority scanning Gives you the option to scan all channels in memory and lock on any active channels or to select the channels you wish to monitor/listen to in a group, along with a priority channel (priority watch)
  • Large easy to read Colour LCD display (green/amber) The keypad and Liquid Crystal Display (LCD) is backlit for easy viewing at night or in low light situations
  • Rugged chassis construction with integrated heat sink The external heat sink cools quickly, ensuring the radio maintains the highest possible output power
  • UHF400R – with rear mic jack

Download User Guide

Download User Spec Sheet

 

 

 

UHF400R
 

Compliance

AS/NZS 4365:2011

Frequency Range TX

476.425 - 477.4125 MHz

Frequency Range RX

400 - 512MHz

Number of TX/RX Channels

80 UHF CB (75 Voice)

  

Channel Spacing TX/RX

12.5KHz

Automatic Level Control

For consistent audio output

Operating modes

Simplex, Repeater TX offset (+750kHz)

Selcall ID

5 Digit with alpha display

Scanning Speed

130 msec per channel

Antenna Impeadance

50 Ohms

  

Operating Volts Range

10 to 30 VDC

Over Voltage Protection

Voltage regulator

Over Current Protection

2 Amp fuse

Reverse Polarity Protection

Series diode

Frequency Stability

+/- 2.5ppm

  

Transmitter

 

RF Output Power

Nominal 5watts

Modulation

F3E (FM)

Maximum Deviation

2.5kHz

Spurious Emissions

< -30 dBm

TX Audio pre-emphasis

+ 6dB/octave from 300Hz to 3kHz

Current Consumption during TX

1.6 Amps with 50 Ohm antenna termination

  

Reciever

 

Circuit Type

Dual conversion superheterodyne

Intermediate Frequencies

1st IF = 21.4MHz , 2nd IF = 450kHz

Audio output power

3 Watts Maximum

Maximum usable sensitivity

< -123dBm at 12dB SINAD

 

 

 

 

 

 

 

 

 

 

RX Audio de-emphasis

-6dB/octave 300Hz to 3kHz

Audio frequency response

300Hz to 3kHz

Spurious Immunity

70dB

Write a review

Please login or register to review
Tags: UHF400R