- Model: IC-410PRO
The Australian IC-410PRO UHF CB comes pre-programmed with 80 UHF CB Channels + 48 user receive channels
The ICOM IC-410PRO is compact and designed for the most extreme Australian conditions. It features die-cast aluminium chassis and a heavy- duty heat sink that gives you the added benefits of a rugged and sturdy construction.The IC-410PRO also comes with a standard active noise cancel MIC which allows clear communication by reducing the surrounding noise, especially the low frequency noise received by the microphone.
The IC-410PRO is also compatible and fully approved for use on Licensed Land Mobile services. (ACMA licensed users only).
Box includes:
- IC-410Pro UHF
- HM211 Noise Cancelling Mic
- DC Power Cable
- Mounting Bracket
- Mic hanging kit
- 80 Channel UHF CB
- Active Noise Cancelling MIC (as standard)
- Easy to see White backlit LCD display
- 5 year warranty on radio
- Exclusive automatic repeater scan easily finds local repeaters
- Rugged MIL SPEC construction provides shock & vibration resistance
- Output power 5 Watts (25W with licensed commercial frequencies)
- Silent Stand-by with CTCSS & Selcall
- Front mounted speaker for clear sound
- Made in Japan
Whats in the box?
Hand microphone (HM-211)
DC power cable
Mounting bracket kit
Microphone hanger kit
Key assign sticker
5 Year Australian Warranty
IC-410PRO | |||
|---|---|---|---|
| Frequency coverage | 476.4250 - 477.4125 MHz (CB) 450.0000 - 520.0000 MHz (LMR) | ||
| Number of channels | 128 Ch | ||
| Type of emission | CB : 8K50F3E (12.5 kHz) LMR: 8K50F3E (12.5 kHz) / 16K0F3E (25 kHz) | ||
| Antenna impedance | 50 Ω nominal | ||
| Operating temperature range | - 30℃ to +60℃ | ||
| Power supply voltage | 13.8 V DC | ||
| Current drain (approx.) | Tx | 25 W | 7.0 A |
| 5 W | 4.0 A | ||
| Rx | Max. audio | 1200 mA | |
| Stand-by | 300 mA | ||
| Dimensions (projections not included; W×H×D) | 150×40×117.5 mm | ||
| Weight (approx.) | 0.8kg | ||
Transmitter
IC-410PRO | |
|---|---|
| RF output power | 5W / 1W (CB) 25 / 5W / 1W (LMR) |
| Modulation | Variable reactancne frequency modulation |
| Maximum permissible deviation | ±2.5 kHz (Narrow) ±5.0 kHz (Wide) |
| Frequency error | ±2.50 ppm |
Receiver
IC-410PRO | |
|---|---|
| Sensitivity at 12dB SINAD | 0.25 μV typ. |
| Audio output power | 4.0 W typ. at 5 % distortion with 4 Ω load |
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
| Standard | MIL-810 F Method, Proc. |
|---|---|
| Low Pressure Storage | 500.4 I |
| Low Pressure Operation | 500.4 II |
| High Temperature Storage | 501.4 I |
| High Temperature Operation | 501.4 II |
| Low Temperature Storage | 502.4 I |
| Low Temperature Operation | 502.4 II |
| Temperature Shock | 503.4 I |
| Solar Radiation | 505.4 I |
| Humidity Induced | 507.4 |
| Settling Dust | 510.4 III |
| Vibration | 514.5 I |
| Shock Functional | 516.5 I |
| Shock Transit Drop | 516.5 IV |
Also meets equivalent MIL STD 810 -C, -D and -E.
All stated specifications are subject to change without notice or obligation.
