MGX D1 80 Channel UHF CB Radio with Noise Cancelling and Dual Speakers – DIN Mount 80Ch 5W for Trucks & Machinery

Need a pro-grade MGX D1 UHF CB radio Australia that's LMR-ready and built for the noisiest Aussie cabs? The MGX D1 is the ultimate DIN-mount UHF CB for truck drivers hauling across the Nullarbor, machinery operators on dusty Pilbara sites, or fleet managers needing seamless licensed comms – delivering crystal-clear 5W on 80 narrowband channels with active noise cancelling, dual loudspeakers (base + mic), and one-touch replay to catch every call. Japanese-engineered excellence: IP66 mic protection, 12/24V auto-sense, programmable smart button, and 128 LMR frequencies (450-520MHz) for secure, dealer-set ops. Comes with 7-year warranty, magnetic mic holder, and free shipping over $99. Power through the roar – connected, always!

Why the MGX D1 is the Best DIN Mount UHF CB with Noise Cancelling for Truckies & Machinery in Australia

This heavy-duty powerhouse redefines cab comms with its active noise cancelling mic that slices through V8 growls or dozer rumbles like butter, while dual speakers (front-facing base + handheld mic) blast audio to every corner of the cab. The colour VA display glows bright for glove-on glances, and the one-touch replay rewinds missed transmissions in seconds – no more "say again?" in a 100 km convoy. Die-cast alloy chassis fits standard 1-DIN slots (173x52x98mm), with 12/24V plug-and-play for semis, tractors, or utes. Engineered for Oz grit: IP66 mic withstands sprays and splashes, SELCAL pings mates directly, and CTCSS/DCS keeps chats private amid interference. LMR flex adds licensed range for mining or emergency fleets.

Real user shout: "MGX D1's noise cancelling turned my noisy Mack cab into a quiet command center – heard the boss over cyclone winds!" – Tom, FIFO Hauler.

MGX D1 Key Features: Noise-Cancelling Power with LMR & Replay for Rugged Aussie Cabs

The MGX D1 DIN UHF CB radio pumps full 5W on 80 CB channels, plus industry-leading tools like active noise cancelling and LMR programming. Everything's designed for quick, safe use on the blacktop or site.

• ✅ Active Noise Cancelling Mic – Filters rumble & wind for crystal-clear voice in noisy cabs
• ✅ Dual Loudspeakers (Base + Mic) – Front/rear audio + external jack for cab-filling volume
• ✅ One-Touch Replay Button – Rewind up to recent transmissions; never miss a call
• ✅ LMR-Ready Programming – 128 channels (450-520MHz) for licensed secure comms (dealer-set)
• ✅ Programmable Smart Button – Custom shortcuts for scan, priority, or functions
• ✅ Priority Channel & Dual Watch – Monitor key channels (e.g., Ch 5/35) + two at once
• ✅ SELCAL & CTCSS/DCS Codes – Selective calling + privacy codes for group chats
• ✅ 12/24V Auto-Sense – Fits cars, trucks, or machinery; fused power lead included

MGX D1 Specs at a Glance

Easy Install Guide: MGX D1 DIN UHF CB Radio in Your Truck or Machinery

Plug-and-play tough — How to install MGX D1 UHF CB radio:

0. Slide into 1-DIN dash slot (fits Kenworth, Caterpillar, or ute consoles).
1. Connect fused power lead to 12/24V battery (auto-senses voltage).
2. Route 4m mic extension + attach magnetic/clip holder (visor or dash).
3. Power up: Rotary select channels, test replay/noise cancel with voice.
4. Dealer-program LMR if needed; monitor Ch 5/35 for emergencies.

What's in the Box?

• 1 × MGX D1 DIN UHF CB Radio
• 1 × Noise-Cancelling Speaker Microphone (IP66 Rated)
• 1 × 1-DIN Mounting Cradle & Bracket
• 1 × Magnetic Mic Holder Clip
• 1 × 4m Mic Extension Lead
• 1 × 100mm Mic Extension M/M Adaptor
• 1 × Fused Power Lead
• User Manual & Quick Start Guide

MGX D1 UHF CB Radio FAQs

What makes the MGX D1 the best DIN mount UHF CB with noise cancelling for trucks?

Its active noise cancelling mic, dual speakers, and LMR programming – tailored for noisy Aussie rigs like Hino or Volvo on long hauls.

Is the MGX D1 compatible with waterproof mics and 12/24V systems?

Yes – IP66 mic pairs with waterproof upgrades; auto-senses 12/24V for seamless truck/ute installs.